| SYNN0101MNXX104 |
| SYNN0101MNXX105 |
| SYNN0101MNXX106 |
| SYNN0101MNXX204 |
| SYNN0102MNXX104 |
| SYNN0102MNXX105 |
| SYNN0102MNXX106 |
| SYNN0103MNXX104 |
| SYNN0103MNXX105 |
| SYNN0103MNXX106 |
| SYNN0107MNXX104 |
| SYNN0301MNXX104 |
| SYNN0301MNXX105 |
| SYNN0301MNXX106 |
| SYNN0301MNXX204 |
| SYNN0302MNXX104 |
| SYNN0302MNXX105 |
| SYNN0302MNXX106 |
| SYNN0302MNXX204 |
| SYNN0302MSXX104 |
| SYNN0303MNXX104 |
| SYNN0303MNXX105 |
| SYNN0303MNXX106 |
| SYNN0307MNXX104 |
| SYNN0307MNXX204 |
| SYNN0307MNXX205 |
| SYNN0307MNXX206 |
| SYNN0310MNXX104 |
| SYNN0601MNXX104 |
| SYNN0601MNXX105 |
| SYNN0601MNXX106 |
| SYNN0601MNXX116 |
| SYNN0601MNXX204 |
| SYNN0602MNXX102 |
| SYNN0602MNXX104 |
| SYNN0602MNXX105 |
| SYNN0602MNXX106 |
| SYNN0602MNXX109 |
| SYNN0602MNXX116 |
| SYNN0602MNXX204 |
| SYNN0603MNXX104 |
| SYNN0603MNXX105 |
| SYNN0603MNXX106 |
| SYNN0607MNXX104 |
| SYNN0607MNXX204 |
| SYNN0610MNXX104 |
| SYNN0610MNXX204 |
| SYNN0636MNXX104 |
Non Sterile Syringe Filters, Syringe Filters, Filters
- High retention efficiency
- 16 Channels for minimum back pressure
- Hydrophilic, having wide chemical compatibility
- HPLC certified for low levels of UV absorbing extractables
- Heat sealed to ensure ‘no leaching’
- No initial flushing required
- Sample filtration for HPLC and other critical instruments
- Filtration of organic solvents and chemicals
| Construction |
| Pore size |
0.1µm, 0.2µm, 0.45µm, 0.8µm, 1.2µm, 5µm |
| Media |
Nylon-66 Membrane |
| Diameter |
|
| Inlet |
Female luer-lock |
| Outlet |
Male luer slip |
| Housing |
Polypropylene |
| Operational |
| Max. Operating Temperature |
55 °C |
| Max. Differential Pressure |
75 psi @ 25° C |
| Burst Pressure |
>12kg/cm² |
| Hold-up Volume(with air purge) |
|
| Clean Water Flow Rate @ 20 psi (0.2µm) |
| > 0.5 ml/min |
> 6 ml/min |
> 40 ml/min |
|
| Clean Water Flow Rate @ 20 psi (0.45µm) |
| > 1 ml/min |
> 10 ml/min |
> 80 ml/min |
|
| Sample Volume |
|
| Assurance |
| Fiber Release |
Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing. |
| Non Fiber Releasing |
Passes test as per USP and comply with USFDA 21 CFR Part 211.72 for fiber release. |
| Particle Release |
The filtrate Complies with USP <788> test for particulate matter in injectables. |
| Indirect Food Additive |
The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520. |
| Oxidizable Substances |
Within limits as specified in USP |
| Quality Management System |
ISO-9001 Certified |
| Type | | Type | Code | | Nylon-66 Membrane Syringe Filters | SYNN | | | Size | | Diameter | Code | | 4mm | 01 | | 13mm | 03 | | 25mm | 06 | | | Pore Size | | Pore Size | Code | | 0.1µm | 36 | | 0.2µm | 01 | | 0.45µm | 02 | | 0.8µm | 03 | | 1.2µm | 10 | | 5µm | 07 | | | Inlet/Outlet | | Code | | Female luer-lock | M | | Male luer slip | N | | | Sterility
| | Code | | Non Sterile | 1
| | | Pack Size | | Pack Size | Code | | 100 | 04 | | 1000 | 06 | | |
Example :
