UA-44035381-1
  • Nylon-66 Membrane Syringe Filters with pre-filter Type- SYGN

Nylon-66 Membrane Syringe Filters with pre-filter Type- SYGN

mdi SYGN syringe filters incorporate Nylon-66 membrane disc filter with pre-filter in a polypropylene housing to facilitate easy filtration of difficult to filter samples with high particulate contamination.

  • High retention efficiency even for colloidal particles
  • 16 Channels for minimum back pressure
  • High throughput
  • Hydrophilic, having wide chemical compatibility
  • HPLC certified for low levels of UV absorbing extractables
  • Heat sealed to ensure ‘no leaching’
  • No initial flushing required
  • Filtration of difficult to filter colloidal, hazy samples
Construction
Membrane Nylon-66 Membrane
Pore size 0.2µm, 0.45µm, 5µm
Prefilter Membrane Borosilicate Microglassfiber
Diameter
13mm 25mm
Inlet Female luer-lock
Outlet Male luer slip
Housing Polypropylene
Operational
Max. Operating Temperature 55 °C
Max. Differential Pressure 75 psi @ 25° C
Burst Pressure >12kg/cm²
Hold-up Volume(with air purge)
<20µl <50µl
Effective Filtration Area
0.8 cm² 4.15 cm²
Clean Water Flow Rate @ 20 psi (0.2µm)
> 8 ml/min > 40 ml/min
Clean Water Flow Rate @ 20 psi (0.45µm)
> 20 ml/min > 80 ml/min
Sample Volume
< 10 ml < 100 ml
Assurance
Fiber Release Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing
Particle Release The filtrate Complies with USP <788> test for particulate matter in injectables
Indirect Food Additive The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520
Quality Management System ISO-9001 Certified
Type
Type Code
Nylon-66 Membrane Syringe filter with microglassfiber prefilter SYGN
Size
Diameter Code
13mm 03
25mm 06
Pore Size
Pore Size Code
0.2µm 01
0.45µm 02
5µm 07
Inlet/Outlet
Code
Female luer-lock M
Male luer slip N
XX
Sterility
Code
Non Sterile 1
Pack Size
Pack Size Code
100 04
1000 06

     Example :

SYGN 03 01 MN XX 1 04
Datasheet Download
Certificate of Quality Download