PTFE Membrane Syringe Filters Type- SYTF
MDI SYTF with PTFE membrane and polypropylene construction are suitable even for filtration of highly aggressive solvents.
- Wide chemical compatibility
- Can be used for highly aggressive solvents
- Low hold up volume for maximum sample recovery
- HPLC certified for very low levels of UV absorbing extractables
- Superior HPLC column protection
- Withstand high operating pressure
- HPLC sample preparation even for highly aggressive solvents
| Construction | ||||
| Membrane | PTFE Membrane | |||
| Pore size | 0.2µm, 0.45µm, 1µm, 5µm | |||
| Diameter |
|
|||
| Inlet | Female luer-lock | |||
| Outlet | Male luer slip | |||
| Housing | Polypropylene | |||
| Operational | ||||
| Max. Operating Temperature | 55 °C | |||
| Max. Differential Pressure | 75 psi @ 25° C | |||
| Burst Pressure | >12kg/cm² | |||
| Hold-up Volume(with air purge) |
|
|||
| Effective Filtration Area |
|
|||
| Clean Water Flow Rate @ 20 psi (0.2µm) |
|
|||
| Clean Water Flow Rate @ 20 psi (0.45µm) |
|
|||
| Sample Volume |
|
|||
| Assurance | ||||
| Fiber Release | Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing. | |||
| Particle Release | The filtrate Complies with USP <788> test for particulate matter in injectables. | |||
| Indirect Food Additive | The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520. | |||
| Oxidizable Substances | Within limits as specified in USP | |||
| Quality Management System | ISO-9001 Certified | |||
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
Example :
| SYTF | 06 | 01 | MN | XX | 1 | 04 |
Have questions or need assistance?
Our team is here to help! Contact us today, and we’ll get back to you as soon as possible.