SYVF0101MNXX104 |
SYVF0101MNXX105 |
SYVF0101MNXX106 |
SYVF0101MNXX204 |
SYVF0101MNXX304 |
SYVF0102MNXX104 |
SYVF0102MNXX105 |
SYVF0102MNXX106 |
SYVF0102MNXX204 |
SYVF0102MNXX304 |
SYVF0301MNXX104 |
SYVF0301MNXX105 |
SYVF0301MNXX106 |
SYVF0301MNXX204 |
SYVF0302MNXX104 |
SYVF0302MNXX105 |
SYVF0302MNXX106 |
SYVF0302MNXX204 |
SYVF0305MNXX104 |
SYVF0336MNXX104 |
SYVF0601MLXX204 |
SYVF0601MNXX104 |
SYVF0601MNXX105 |
SYVF0601MNXX106 |
SYVF0601MNXX116 |
SYVF0601MNXX204 |
SYVF0601MNXX205 |
SYVF0601NNXX204 |
SYVF0602MNXX104 |
SYVF0602MNXX105 |
SYVF0602MNXX106 |
SYVF0602MNXX109 |
SYVF0602MNXX116 |
SYVF0602MNXX204 |
SYVF0610MNXX104 |
SYVF0636MNXX104 |
Syringe filters, non sterile syringe filters, filters
- High retention efficiency
- Wide chemical compatibility
- Low hold up volume for maximum sample recovery
- HPLC certified for very low levels of UV absorbing extractables
- Superior HPLC column protection
- Minimal adsorption
- HPLC samples preparation
- Prefiltration and clarification of laboratory samples
Construction |
Membrane |
Hydrophilic PVDF Membrane |
Pore size |
0.1µm, 0.2µm, 0.45µm, 1µm, 1.2µm |
Diameter |
|
Inlet |
Female luer-lock |
Outlet |
Male luer slip |
Housing |
Polypropylene |
Operational |
Max. Operating Temperature |
55 °C |
Max. Differential Pressure |
75 psi @ 25° C |
Burst Pressure |
>12kg/cm² |
Hold-up Volume(with air purge) |
|
Effective Filtration Area |
0.07 cm² |
0.8 cm² |
4.15 cm² |
|
Clean Water Flow Rate @ 20 psi (0.2µm) |
> 0.3 ml/min |
> 8 ml/min |
> 40 ml/min |
|
Clean Water Flow Rate @ 20 psi (0.45µm) |
> 1.2 ml/min |
> 30 ml/min |
> 120 ml/min |
|
Sample Volume |
|
Assurance |
Fiber Release |
Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing. |
Particle Release |
The filtrate Complies with USP <788> test for particulate matter in injectables. |
Indirect Food Additive |
The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520 . |
Oxidizable Substances |
Within limits as specified in USP |
Quality Management System |
ISO-9001 Certified |
Type | Type | Code | PVDF Membrane Syringe Filter | SYVF | | Size | Diameter | Code | 4mm | 01 | 13mm | 03 | 25mm | 06 | | Pore Size | Pore Size | Code | 0.1µm | 36 | 0.2µm | 01 | 0.45µm | 02 | 1µm | 05 | 1.2µm | 10 | | Inlet/Outlet | | Code | Female luer-lock | M | Male luer slip | N | | | Sterility | | Code | Non Sterile | 1 | | Pack Size | Pack Size | Code | 100 | 04 | 1000 | 06 | | |
* SZVF and STVF are available only in 25mm
Example :