UA-44035381-1
  • ClariPro<sup>®</sup> GK 25mm, 50mm

ClariPro® GK 25mm, 50mm

mdi ClariPro® GK are lab scale hydrophilic PES membrane capsule filters are ready to use, disposable filtration devices. These are specially designed filters incorporating a microglass fiber upstream layer and a downstream PES membrane final layer and are used as pre-filters in biopharmaceutical process development laboratories for difficult to filter solutions.The microglass fiber layer offers high dirt holding capacity and efficient retention of colloidal particles to give clear downstream in case of difficult to filter turbid solutions. The downstream PES membrane offers absolute retention, and low protein binding along with high flow rates.

  • High Flow Rates
  • High Throughput
  • Very High Retention
  • Low Protein Binding
  • Compact Design
  • Precipitate removal post viral inactivation
  • Pre-filtration of serum solutions
  • Clarification of cell harvest supernatants
  • Polishing of turbid solutions
Construction
Membrane Hydrophilic PES
Pore size 0.1µm, 0.2µm, 0.5µm
Prefilter Membrane Microglassfiber
Support Layers Polyester
Body and Core Polypropylene
Size
Size
25mm 50mm
Effective Filtration Area (Nominal)
5cm² 20cm²
Operational
Max. Operating Temperature
55 °C60 °C
Max. Differential Pressure
75 Psi (5 Kg/cm²)@ 25 °C42 Psi (3 Kg/cm²) @ 30 °C
Burst Pressure >8 Kg/cm²
Sterilization By Gas Sterilizable by Ethylene Oxide
Sterilization By Autoclave Autoclavable at 125°C for 30minutes, 25 cycle and it cannot be In-line steam sterilized
Shelf Life 3 years after EO sterilization
Assurance
Toxicity Passes Bioreactivity test, In Vivo, as per USP <88> for Class VI plastics
Bacterial Endotoxin Aqueous extracts exhibit < 0.25 EU/ml as established by Limulus Amebocyte Lysate (LAL) Test
Bioburden Bioburden level is < 1000 cfu/filter device as per ISO 11737-1 : 2018
Non Fiber Releasing Passes test as per USP and comply with USFDA 21 CFR Part 210.3 (b)(6) for fiber release
Particle Release The filtrate complies with USP <788> test for particulate matter in injections
Indirect Food Additive All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520
Good Manufacturing Practice These products are manufactured in a facility which adheres to Good Manufacturing Practices
Oxidizable Substances Within limits as specified in USP
Quality Management System ISO-9001 Certified
USFDA DMF No. 015554

ClariPro® GK- 25mm

Type
ClariPro® GK
IGKX
Size
Size Code
25mm 06
Pore Size
Pore Size
Code
0.1µm 36
0.2µm 01
0.5µm 04
I/O Connection
Connection Code
Female Luer Lock M
Male Luer Slip N
⅛" Hose Barb H
¼" Hose Barb B
X
X
Sterility
Code
Non Sterile 1
EO Sterile 2
Pack Size
Pack Size Code
100 04

Example :

IGKX 06 04 MN X X 1 04

Example for Non Sterile: IGKX0604MNXX104                                                            Example for EO Sterile: IGKX0604MNXX204


ClariPro® GK- 50mm

Type
ClariPro® GK (with vent)
VGKX
ClariPro® GK (without vent)
IGKX
Size
Size Code
50mm 10
Pore Size
Pore Size
Code
0.1µm 36
0.2µm 01
0.5µm 04
I/O Connection
Connection Code
¼” SHB B*
¾" Sanitary Flange* S*
Female Luer Lock** M**
X
X
Sterility
Code
Non Sterile 1
EO Sterile 2
Pack Size
Pack Size Code
10 02

*¼" Stepped Hose Barb and ¾" Sanitary Flange are available in filters with vent only

**Female luer lock is available in filters without vent only

VGKX 10 04 BB X X 1 02
Example for Non Sterile: VGKX1004BBXX102                                                            Example for EO Sterile: VGKX1004BBXX202

ClariPro GK inline flow rates

Datasheet Download
Certificate of Quality Download

Write a review

Note: HTML is not translated!
    Bad           Good