UA-44035381-1
  • ClariCap<sup>®</sup> PP 5", 10", 20", 30"

ClariCap® PP 5", 10", 20", 30"

mdi ClariCap® PP polypropylene large capsule filters have been designed for particle removal applications in liquids and air/gases. These are suitable for use in pharmaceutical and biopharmaceutical prefiltration applications.

The pleated polypropylene filtration media and all polypropylene polymer housing has high heat resistance and exhibits very wide chemical compatibility. These offer high retention efficiency thereby enhancing the performance (life and efficiency) of terminal sterilization filters.

mdi ClariCap® PP capsule filters offer ease of use because of negligible assembling time as compared to the standard stainless steel filtration housing assemblies. These also do away with the requirement of cleaning and validation of conventional filtration housing assemblies.

Consistent and Reliable Quality:ClariCap® capsule filters are produced with ISO 9001 certified quality management systems.
Regulatory Compliance:Meet all pharmacopeial and compendia requirements and are registered with USFDA DMF #015554
  • Pre-filtration of high value drug solutions
  • Pre-filtration of drug vehicles
  • Pre-filtration of air to small fermentors
Construction
Membrane Polypropylene
Pore size 0.5μm, 1μm, 1.2μm, 2.5μm, 5μm, 10μm, 20μm
Support Layers Polypropylene
Body and Core Polypropylene
Size
Size
5"10" 20"30"
Effective Filtration Area (Nominal)
2500cm²5000cm²10000cm²15000cm²
Dimension (End to End) - 1½" Sanitary Flange Inlet ½" Hose Barb Outlet
212 mm334 mm620 mm870 mm
Dimension (End to End) - ¾" Sanitary Flange I/O
214 mm 335 mm -- --
Dimension (End to End) - 1½" Sanitary Flange I/O
205 mm330 mm600 mm855 mm
Dimension (End to End) - ½" Single Step Hose Barb I/O
218 mm336 mm630 mm890 mm
Dimension (End to End) - 1" Hose Barb I/O
-- 405 mm 635 mm 895 mm
Operational Radius (with Vent/ Drain)
78 mm78 mm78 mm78 mm
Dimension (End to End) - 3/8" Hose Barb I/O
211 mm 332 mm 634 mm 885 mm
Vent and Drain ¼" Hose Barb with Silicone "O" rings
Operational
Max. Operating Temperature 80 °C @ < 30 psi (2 Kg/cm²)
Max. Differential Pressure < 60 psi (4 Kg/cm²) @ 30 °C
Sterilization Autoclavable at 125 °C for 30 minutes, 30 cycles and it cannot be in-line steam sterilized
Assurance
Toxicity Passes Bioreactivity test, In Vivo, as per USP for Class VI plastics
Bacterial Endotoxin Aqueous extracts exhibit < 0.25 EU/ml as established by Limulus Amebocyte Lysate (LAL) Test
Bioburden Bioburden level is < 1000 cfu/filter device as per ISO 11737-1 : 2018
Non Fiber Releasing Passes test as per USP and comply with USFDA 21 CFR Part 210.3 (b)(6) for fiber release
Particle Release The filtrate complies with USP <788> test for particulate matter in injections
Indirect Food Additive All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520
Extractables with WFI Passes test as per USP
Good Manufacturing Practice These products are manufactured in a facility which adheres to Good Manufacturing Practices.
Oxidizable Substances Within limits as specified in USP
Quality Management System ISO-9001 Certified
USFDA DMF No. 015554
Type
ClariCap® PP
LOLX
Size
Size Code
5"* 53
10" 54
20" 55
30" 56
Pore Size
Pore Size Code
0.5µm 04
1μm 05
1.2μm 10
2.5µm 06
5µm 07
10µm 08
20µm 11
I/O Connection
Connection Code
1½" Sanitary Flange E
3/8” Hose Barb I
3/4” Sanitary Flange*** S
Single Step ½" Hose Barb Q
1” Hose Barb**** Z
X
Inline/T-line
Code
Inline X
T-Line** T
Sterility
Code
Non Sterile 1
Pack Size
Pack Size Code
1 01

*T-line is not available in 5” Capsule Filter

**T-line Capsule Filters are available with 1½” Sanitary Flange I/O Connection only

***3/4" Sanitary Flange end connection is available only in 5" and 10" capsule filters

****1" Hose Barb is not available in 5" capsule filters


Example :

LOLX 54 05 QQ X X 1 01

Example for Non Sterile: LOLX5405QQXX101

ClariCap PP large flow rates

Datasheet Download
Certificate of Quality Download

Write a review

Note: HTML is not translated!
    Bad           Good