UA-44035381-1
  • ClariSure GP 5", 10", 20", 30"

ClariSure GP 5", 10", 20", 30"

mdi ClariSure GP cartridge filters are specially designed multilayered precision filtration devices. These cartridge filters act as throughput enhancers, specially in case of difficult to filter solutions.
A microglassfiber upstream layer retains very fine colloidal particles and a downstream polypropylene layer checks any kind of media migration.

Consistent and Reliable Quality:ClariSure GP cartridge filters are produced with ISO 9001-2008 certified quality management systems.
Regulatory Compliance:Meet all pharmacopeial and compendia requirements and are registered with USFDA DMF #015554
High Throughputs:Translates to lower filtration costs, less number of filter changes and overall economy of operations.
Total Traceability
Unique identification number is laser etched on each other.
  • Pre-filtration of large volume parenterals
  • Pre-filtration of difficult to filter solutions
  • Pre-filtration of difficult to filter SVP like Oxytetracycline
Construction
Pore size 0.5µm, 1µm, 2µm
Filter Media Microglassfiber
Support Layers Polypropylene
Body and Core Polypropylene
Size
Size
5" 10" 20" 30"
Effective Filtration Area (Nominal)
2500cm² 5000cm² 10000cm² 15000cm²
Operational
Max. Operating Temperature 80 °C @ < 30 psi (2 Kg/cm²)
Max. Differential Pressure 50 psi (3.5 Kg/cm²) @ 25 °C
Sterilization Autoclavable/In-line Steam Sterilizable at 121°C for 30 minutes, 30 Cycles.
Assurance
Toxicity Passes Bioreactivity test, In Vivo, as per USP for Class VI plastics
Non Fiber Releasing Passes test as per USP and comply with USFDA 21 CFR Part 210.3(b)(6) for fiber release
Indirect Food Additive All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520
Extractables with WFI Passes test as per USP
Good Manufacturing Practice These products are manufactured in a facility which adheres to Good Manufacturing Practices.
Oxidizable Substances Within limits as specified in USP
Particle Shedding Passes USP test for particulates in injectables
Quality Management System ISO-9001 Certified
USFDA DMF No. 015554
Type
ClariSure GP CPGP
Size
Size Code
5"** 53
10" 54
20" 55
30" 56
Pore Size
Pore Size Code
0.5µm 04
1µm 05
2µm 15
Adapter
Code
7P A0
7P without fin A1
28 with fin C0
'O' D0
Elastomer
Code
Silicone SS
Viton SV
EPDM SE
FEP Encapsulated Viton FV*
Sterility
Code
Non Sterile 1
Pack Size
Pack Size Code
1 01
*FV is available in Adapter Code A0 (7P) and A1 (7P without fin) only
**Size 5" is available in Code A0 (7P) and A1 (7P without fin) only

Example :

CPGP 56 05 A0 SV 1 01
Example for Non Sterile: CPGP5605A0SV101

Datasheet Download
Certificate of Quality Download

Write a review

Note: HTML is not translated!
    Bad           Good