SYPP0101MNXX104 |
SYPP0102MNXX104 |
SYPP0107MNXX104 |
SYPP0107MNXX105 |
SYPP0107MNXX106 |
SYPP0107MNXX204 |
SYPP0108MNXX104 |
SYPP0108MNXX105 |
SYPP0108MNXX106 |
SYPP0108MNXX204 |
SYPP0111MNXX104 |
SYPP0111MNXX105 |
SYPP0111MNXX106 |
SYPP0111MNXX204 |
SYPP0301MNXX104 |
SYPP0302MNXX102 |
SYPP0302MNXX104 |
SYPP0307MNXX104 |
SYPP0307MNXX105 |
SYPP0307MNXX106 |
SYPP0307MNXX204 |
SYPP0308MNXX104 |
SYPP0308MNXX105 |
SYPP0308MNXX106 |
SYPP0308MNXX204 |
SYPP0311MNXX104 |
SYPP0311MNXX105 |
SYPP0311MNXX106 |
SYPP0311MNXX204 |
SYPP0601MNXX104 |
SYPP0601MNXX116 |
SYPP0602MNXX102 |
SYPP0602MNXX104 |
SYPP0602MNXX109 |
SYPP0605MNXX104 |
SYPP0605MNXX116 |
SYPP0606MNXX104 |
SYPP0607MNXX104 |
SYPP0607MNXX105 |
SYPP0607MNXX106 |
SYPP0607MNXX204 |
SYPP0608MNXX104 |
SYPP0608MNXX105 |
SYPP0608MNXX106 |
SYPP0608MNXX204 |
SYPP0611MLXX104 |
SYPP0611MNXX104 |
SYPP0611MNXX105 |
SYPP0611MNXX106 |
SYPP0611MNXX204 |
SYPP0614MNXX104 |
SYPP0615MNXX104 |
SYPP0620MNXX104 |
Syringe filters, non sterile syringe filters, filters
- 100% polypropylene construction
- Acid and base resistant
- Wide chemical compatibility with solvents
- Low hold up volume for maximum sample recovery
- High throughput for viscous samples
- Sample preparation for HPLC
- Clarification of laboratory samples
- One filter for most applications
Construction |
Membrane |
Polypropylene |
Pore size |
0.2µm, 0.45µm |
Diameter |
|
Inlet |
Female luer-lock |
Outlet |
Male luer slip |
Housing |
Polypropylene |
Operational |
Max. Operating Temperature |
55 °C |
Max. Differential Pressure |
75 psi @ 25° C |
Burst Pressure |
>12kg/cm² |
Hold-up Volume(with air purge) |
|
Effective Filtration Area |
0.07 cm² |
0.8 cm² |
4.15 cm² |
|
Clean Water Flow Rate @ 20 psi (0.2µm) |
-- |
> 450 ml/min |
> 650 ml/min |
|
Clean Water Flow Rate @ 20 psi (0.45µm) |
> 0.5 ml/min |
-- |
> 70 ml/min |
|
Sample Volume |
|
Assurance |
Fiber Release |
Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing |
Particle Release |
The filtrate Complies with USP <788> test for particulate matter in injectables |
Indirect Food Additive |
The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520 |
Quality Management System |
ISO-9001 Certified |
Type | Type | Code | Polypropylene Syringe Filter | SYPP | | Size | Diameter | Code | 4mm | 01 | 13mm | 03 | 25mm | 06 | | Pore Size | Pore Size | Code | 0.2µm | 01 | 0.45µm | 02 | | Inlet/Outlet | | Code | Female luer-lock | M | Male luer slip | N | | | Sterility | | Code | Non Sterile | 1 | | Pack Size | Pack Size | Code | 100 | 04 | 1000 | 06 | | |
*SZPP and STPP are available only in 25mm
Example :