ClariCap® GS 25mm,50mm
mdi ClariCap® GS Microglassfiber Capsule Filters are multilayered, high throughput filters, specially designed for turbid and difficult to filter solutions. The microglassfiber medium is designed to retain colloidal particles and for removal of deformable and nondeformable particles and microorganisms from liquids.
The polypropylene layer downstream of microglassfiber layers prevents media migration. The high dirt holding capacity, biochemical inertness, adsorption and high wet strength of the filtration medium makes it suitable for clarification and prefiltration of wide range of aqueous, non-aqueous and biologicals solutions.
- High Flow Rates
- High Throughput
- Very High Retention
- Compact Design
- Pre-filtration of cell culture media
- Pre-filtration of serum solutions
- Clarification of cell harvest supernatants
- Pre-filtration of protein solutions
- Pre-filtration of high value difficult to filter drug solutions
- Pre-filtration of difficult to filter small volume parenterals
- Polishing of turbid solutions
Construction | |||
Pore size | 0.7µm, 1µm, 1.5µm,2µm | ||
Filter Media | Multilayered Microglassfiber | ||
Downstream Layer | Polypropylene | ||
Body and Core | Polypropylene | ||
Size | |||
Size |
|
||
Effective Filtration Area (Nominal) |
|
||
Operational | |||
Max. Operating Temperature | 60 °C | ||
Max. Differential Pressure | 3Kg/cm² (42 psi) @ 30 °C | ||
Burst Pressure | >8Kg/cm² | ||
Sterilization By Gas | Sterilizable by Ethylene Oxide | ||
Sterilization By Autoclave | Autoclavable at 125°C for 30minutes, 30 cycles and it cannot be in-line steam sterilized | ||
Shelf Life | 3 years after EO sterilization | ||
Assurance | |||
Toxicity | Passes Bioreactivity test, In Vivo, as per USP <88> for Class VI plastics | ||
Bacterial Endotoxin | Aqueous extracts exhibit < 0.25 EU/ml as established by Limulus Amebocyte Lysate (LAL) Test | ||
Bioburden | Bioburden level is < 1000 cfu/filter device as per ISO 11737-1 : 2018 | ||
Non Fiber Releasing | Passes test as per USP and comply with USFDA 21 CFR Part 210.3 (b)(6) for fiber release | ||
Particle Release | The filtrate complies with USP <788> test for particulate matter in injections | ||
Indirect Food Additive | All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520 | ||
Good Manufacturing Practice | These products are manufactured in a facility which adheres to Good Manufacturing Practices | ||
Oxidizable Substances | Within limits as specified in USP | ||
Particle Shedding | Passes USP test for particulates in injections | ||
Quality Management System | ISO-9001 Certified | ||
USFDA | DMF No. 015554 |
ClariCap® GS- 25mm
|
|
|
|
|
|
|
|
Example :
IGKX | 06 | 05 | MN | X | X | 1 | 04 |
Example for Non Sterile: IGSX0605MNXX104 Example for EO Sterile: IGSX0605MNXX204
ClariCap® GS- 50mm
|
|
|
|
|
|
|
|
*¼" Stepped Hose Barb and ¾" Sanitary Flange are available in filters with vent only
**Female luer lock is available in filters without vent only
Example :
VGSX | 10 | 05 | BB | X | X | 1 | 02 |