Polypropylene Syringe Filters Type- SYPP
MDI Polypropylene Syringe Filters type SYPP use polypropylene membrane encased in natural polypropylene housing with standard inlet (female luer lock) and outlet (male luer slip) connections. These are designed for quick and efficient sample preparation, and clarification.
These syringe filters are produced with validated processes and QA/QC systems to ensure inter-lot as well as intra-lot consistency.
- 100% polypropylene construction
- Acid and base resistant
- Wide chemical compatibility with solvents
- Low hold up volume for maximum sample recovery
- High throughput for viscous samples
- Sample preparation for HPLC
- Clarification of laboratory samples
- One filter for most applications
| Construction | ||||
| Membrane | Polypropylene | |||
| Pore size | 0.2µm, 0.45µm | |||
| Diameter |
|
|||
| Inlet | Female luer-lock | |||
| Outlet | Male luer slip | |||
| Housing | Polypropylene | |||
| Operational | ||||
| Max. Operating Temperature | 55 °C | |||
| Max. Differential Pressure | 75 psi @ 25° C | |||
| Burst Pressure | >12kg/cm² | |||
| Hold-up Volume(with air purge) |
|
|||
| Effective Filtration Area |
|
|||
| Clean Water Flow Rate @ 20 psi (0.2µm) |
|
|||
| Clean Water Flow Rate @ 20 psi (0.45µm) |
|
|||
| Sample Volume |
|
|||
| Assurance | ||||
| Fiber Release | Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing | |||
| Particle Release | The filtrate Complies with USP <788> test for particulate matter in injectables | |||
| Indirect Food Additive | The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520 | |||
| Quality Management System | ISO-9001 Certified | |||
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
*SZPP and STPP are available only in 25mm
Example :
| SYPP | 06 | 02 | MN | XX | 1 | 04 |
Have questions or need assistance?
Our team is here to help! Contact us today, and we’ll get back to you as soon as possible.