Pre-sterilized Nylon-66 Membrane Syringe Filters
MDI SYNN-S syringe filters have Nylon-66 membrane disc filter in a polypropylene housing. These syringe filters are ideal for filtration of aqueous or organic samples.
MDI Nylon syringe filters provide absolute retention, wide chemical compatibility, and extremely low extractables while offering excellent flow rates.
These filters are validated and assured for quality to ensure superior performance.
- Absolute retention
- Low hold-up volume
- Minimum back pressure
- Extremely low extractables
- Hydrophilic, no pre-wettingrequired
- Wide chemical compatibility
- Heat sealed to ensure ‘noleaching’
- No initial flushing required
- Validated for bacterialretention as per ASTM F838
- Sterile Filtration of DMSO for Cryo-preservation of stem cells
- Special 5µm filters forparticulate removal frompharmaceutical parenteralsjust before administration
| Construction | ||||
| Membrane | Pre-sterilized Nylon-66 Membrane Syringe Filters | |||
| Pore size | 0.2µm, 0.45µm | |||
| Diameter |
|
|||
| Inlet | Female luer-lock | |||
| Outlet | Male luer slip | |||
| Housing | Polypropylene | |||
| Operational | ||||
| Max. Operating Temperature | 55 °C | |||
| Max. Differential Pressure | 75 psi @ 25° C | |||
| Burst Pressure | >12kg/cm² | |||
| Hold-up Volume(with air purge) |
|
|||
| Effective Filtration Area |
|
|||
| Bubble Point (0.2 µm) | >50 psi(>3.52 Kg/cm2) | |||
| Bubble Point (0.45 µm) | >32 psi(>2.25 Kg/cm2) | |||
| Clean Water Flow Rate @ 20 psi (0.2µm) |
|
|||
| Clean Water Flow Rate @ 20 psi (0.45µm) |
|
|||
| Sample Volume |
|
|||
| Retention Efficiency (0.45µm) | LRV >7 for S. marcescens (ATCC 14756) per cm2 of filter area | |||
| Retention Efficiency (0.2µm) | LRV >7 for Br. diminuta (ATCC 19146) per cm2 of filter area | |||
| Assurance | ||||
| Fiber Release | Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial flushing. | |||
| Particle Release | The filtrate Complies with USP <788> test for particulate matter in injectables. | |||
| Indirect Food Additive | The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520 . | |||
| Quality Management System | ISO-9001 Certified | |||
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
Example :
| SYNN | 06 | 01 | MN | XX | 2 | 04 |
Have questions or need assistance?
Our team is here to help! Contact us today, and we’ll get back to you as soon as possible.