BioPro® KSO-γ Small
The BioPro® KSO is designed for protecting your critical and high value downstream systems.
It helps in significant reduction of bioburden and complete removal of particulate contamination. It is ideal for applications which do not require sterilization but where reduction in bio load in the process fluid is the objective.
It improves the process efficiency by reducing filter sizing and prolonging life of expensive sterilizing filters.
These filters provide easy scalability from process development labs to actual manufacturing processes.
- Validated for high bio-burden
- High flow rates
- High throughput
- Low protein binding
- No media migration
- Biologically inert
- Easy installation
- 100% integrity tested
- Bioburden maintained below 1000 cfu/device
- Endotoxin level certified to be <0.25 EU/ml
- Widest range of end connections
- Products available for total scalability from a few ml to thousands of liters
- Total traceability through unique serial number for each filter
- Individual certificate of quality for each device
- Sterilizable by autoclaving or Ethylene Oxide
- Clarification of cell harvest
- Buffer filtration
- In process protein filtration
- Prefiltration to sterile filtration
- Prefiltration to virus filtration
Construction | |||||
Membrane | Hydrophilic PES | ||||
Final Filter Pore Size | 0.1µm, 0.2µm, 0.45µm | ||||
Support Layers | Polypropylene | ||||
Body and Core | Polypropylene | ||||
Size | |||||
Size |
|
||||
Effective Filtration Area (Nominal) |
|
||||
Dimension (End to End) – 1½” Sanitary Flange Inlet ½” Single Step Hose Barb Outlet |
|
||||
Dimension (End to End) – ¾” Sanitary Flange I/O |
|
||||
Dimension (End to End) – 1½” Sanitary Flange I/O |
|
||||
Dimension (End to End) – ½” Hose Barb I/O |
|
||||
Dimension (End to End) – ½” Single Step Hose Barb I/O |
|
||||
Operational Radius (with Vent/ Drain) |
|
||||
Vent and Drain | ¼” Hose Barb with Silicone “O” rings | ||||
Integrity Testing / Retention | |||||
Bacterial Retention |
|
||||
Bubble Point (with water) |
|
||||
Operational | |||||
Max. Operating Temperature | 80 °C @ < 30 psi (2 Kg/cm²) | ||||
Max. Differential Pressure | 60 psi (4 Kg/cm²) @ 30° C | ||||
pH Compatibility | Compatible with 1-14 pH | ||||
Sterilization By Irradiation | Gamma Irradiatiable up to 50 kGy. These filters should not be autoclaved or in-line steam sterilized. | ||||
Shelf Life | 2 years after Gamma sterilization | ||||
Assurance | |||||
Toxicity | Passes Bioreactivity test, Invivo, as per USP <88> for Class VI plastics | ||||
Bacterial Endotoxin | Aqueous extracts exhibit < 0.25 EU/ml as established by Limulus Amebocyte Lysate (LAL) Test as per USP <85> | ||||
Bioburden | Bioburden level is < 1000 cfu/filter device as per ISO 11737-1 : 2018 | ||||
Non Fiber Releasing | Complies with USFDA CFR Title 21, 210.3 (b) (6) | ||||
Particle Release | The filtrate complies with USP <788> test for particulate matter in injections | ||||
Indirect Food Additive | Passes as per USFDA 21 CFR 177.1520 | ||||
Extractables with WFI | Passes NVR test as per USP <661> | ||||
Good Manufacturing Practice | These products are manufactured in a facility which adheres to Good Manufacturing Practices. | ||||
Oxidizable Substances | Passes test as per USP <1231> | ||||
Quality Management System | ISO-9001 Certified | ||||
USFDA | DMF No. 015554 |
|
|
|
|
|
|
|
|
*1″ Capsule filters are not available with ½” Single Step Hose Barb and ½” MNPT
**Male luer slip is available only in 1” capsule filter as outlet
***3/16″ Hose Barb end connection is available in:
- 1″ and 2″ capsule filters as inlet and outlet
- 5″ capsule filters as outlet only
a: Gamma sterilized filters cannot be gamma irradiated again
b: Bell and bell with cover is available with :
- ½” HB outlet connections in 1”, 2”, 5” and 8” capsule filters
- ¼” SHB outlet connection in 1” capsule filters only
Example :
DBKO | 57 | 01 | EE | X | X | 3 | 01 |
Example for Non Sterile: DBKO5701EEXX101 Example for EO Sterile: DBKO5701EEXX301
Have questions or need assistance?
Our team is here to help! Contact us today, and we’ll get back to you as soon as possible.