SYGF0302MNXX104 |
SYGF0305MNXX104 |
SYGF0305MNXX106 |
SYGF0316MNXX104 |
SYGF0602MNXX102 |
SYGF0602MNXX104 |
SYGF0602MNXX109 |
SYGF0605MNXX104 |
SYGF0605MNXX105 |
SYGF0605MNXX106 |
SYGF0605MNXX109 |
SYGF0605MNXX116 |
SYGF0615MNXX104 |
SYGF0616MNXX104 |
Syringe filters, non sterile syringe filters, filters
- Wide chemical compatibility
- Low hold up volume for maximum sample recovery
- High throughput for viscous samples
- Sample preparation for HPLC
- Clarification of laboratory samples
Construction |
Membrane |
Microglassfiber |
Pore size |
0.45µm, 1µm, 3µm |
Diameter |
|
Inlet |
Female luer-lock |
Outlet |
Male luer slip |
Housing |
Polypropylene |
Operational |
Max. Operating Temperature |
55 °C |
Max. Differential Pressure |
75 psi @ 25° C |
Burst Pressure |
>12kg/cm² |
Hold-up Volume(with air purge) |
|
Effective Filtration Area |
|
Sample Volume |
|
Clean Water Flow Rate @ 20 psi (1.0 µm) |
> 180 ml/min |
> 300 ml/min |
|
Assurance |
Fiber Release |
Complies with USFDA CFR Title 21, Part 210.3(b)(6) and do not requires any initial Flushing |
Particle Release |
The filtrate Complies with USP <788> test for particulate matter in injectables |
Indirect Food Additive |
The plastic housing material complies with the requirements of USFDA CFR Title 21 Part 177.1520 |
Oxidizable Substances |
Within limits as specified in USP |
Quality Management System |
ISO-9001 Certified |
Type | Type | Code | Microglassfiber Syringe Filters | SYGF | | Size | Diameter | Code | 13mm | 03 | 25mm | 06 | | Pore Size | Pore Size | Code | 0.45µm | 02 | 1µm | 05 | 3µm | 16 | | Inlet/Outlet | | Code | Female luer-lock | M | Male luer slip | N | | | Sterility | | Code | Non Sterile | 1 | | Pack Size | Pack Size | Code | 100 | 04 | 1000 | 06 | | |
*SZGF and STGF are available only in 25mm
Example :