UA-44035381-1
  • 0.1µm AseptiCap<sup>®</sup> WL/WS 25mm, 50mm

0.1µm AseptiCap® WL/WS 25mm, 50mm

mdi AseptiCap® WS are low protein binding hydrophilic PVDF gamma sterilizable membrane inline capsule filters, designed for sterile filtration of very small fluid volumes in formulation and process development labs.

These capsule filters are validated to meet compendia and regulatory requirements and are well characterized. They meet key process requirements such as absolute retention efficiency, extremely low extractables, high throughputs, wide chemical compatibility and other important characteristics.

  • Absolute retention
  • 100% integrity tested
  • Low protein binding
  • Low extractables
  • Very low hold up volume

Sterile Filtration of:

  • Cell culture media
  • Growth regulators
  • Small Volume Parenterals
Construction
Membrane 0.1 µm Hydrophilic PVDF
Prefilter Membrane 0.2 µm Hydrophilic PVDF
Plastic parts Polypropylene
Size
Size
25 mm 50 mm
Effective Filtration Area (Nominal)
5 cm²20 cm²
Dimension (End to End) - Female Luer Lock Inlet/ Male Luer Slip
23 mm --
Dimension (End to End) - ¼" SHB
-- 79 mm
Dimension (End to End) - ¾" Sanitary Flange Inlet I/O
-- 51 mm
Operational Radius (with Vent/ Drain)
15 mm 28 mm
Integrity Testing / Retention
Bubble Point

> 28 psi (1.96 Kg/cm²) with 50% IPA

> 70 psi (4.92 Kg/cm²) with Water
Microbial Retention LRV>7 for Acholeplasma laidlawii (ATCC 23206) per cm²
Operational
Max. Operating Temperature
55 °C 60 °C
Max. Differential Pressure
75 Psi (5 Kg/cm²)@ 25 °C42 Psi (3 Kg/cm²) @ 30 °C
Sterilization By Gas Sterilization by Ethylene Oxide
Sterilization By Autoclave Autoclavable at 125°C for 30 minutes, 2 cycles and it cannot be in-line steam sterilized
Shelf Life 3 years after EO sterilization
Assurance
Toxicity Passes Bioreactivity test, In Vivo, as per USP <88> for Class VI plastics
Cytotoxicity Passes Biological Reactivity Tests, In Vitro, USP <87> for cytotoxicity
Bacterial Endotoxin Aqueous extracts exhibit < 0.25 EU/ml as established by Limulus Amebocyte Lysate (LAL) Test
Bioburden Bioburden level is < 1000 cfu/filter device as per ISO 11737-1 : 2018
Non Fiber Releasing Passes test as per USP and comply with USFDA 21 CFR Part 210.3(b)(6) for fiber release
TOC and Conductivity Meets the WFI requirements of USP for TOC <643> and Conductivity <645> after a specified minimal flush
Indirect Food Additive All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520
Extractables with WFI Passes test as per USP
Oxidizable Substances Within limits as specified in USP
Particle Shedding Passes USP test for particulates in injectables.
Quality Management System ISO-9001 Certified
USFDA DMF No. 015554

0.1μm AseptiCap® WL/WS (25mm)

Type
IWL(Single Layer) IWLX
IWS(0.2 μm Upstream) IWS1
IWS(0.45 μm Upstream) IWSX
Size
Dia Code
25mm 06
Pore Size
Pore Size Code
0.1µm 36
Inlet/Outlet
Connection Code
⅛" Hose Barb
 H
¼" Hose Barb B
Female Luer lock M
Male Luer Slip N
X
X
Sterility
Code
Non Sterile 1
EO Sterile 2
Pack Size
Pack Size Code
100 04

Example:

IWS1 06 36
 M N X X 1 04
Example for Non Sterile: IWS10636MNRX104          Example for EO Sterile: IWS10636MNXX204

0.1μm AseptiCap® WL/WS (50mm)

Type
IWL (without Vent) (Single Layer) IWLX
IWS (without Vent) (0.2 μm Upstream) IWS1
IWS (without Vent) (0.45 μm Upstream) IWSX
VWL (with Vent) (Single Layer VWLX
VWS (with Vent) (0.2 μm Upstream) VWS1
VWS (with Vent) (0.45 μm Upstream VWSX
Size
Dia Code
50mm 10
Pore Size
Pore Size Code
0.1µm 36
Inlet/Outlet
Connection Code
¼" Stepped Hose Barb B*
¾" Sanitary Flange S*
Female Luer Lock M**
X
X
Sterility
Code
Non Sterile 1
EO Sterile 2
Pack Size
Pack Size Code
10 02
100 04

*¼" Stepped Hose Barb and ¾" Sanitary Flange are available in filters with vent only

**Female luer lock is available in filters without vent only

Example:

VWS1 10 36 SS X
 X 1 04
Example for Non Sterile: VWS11036SSXX104          Example for Gamma Sterile: VWS11036SSXX204
Datasheet Download
Certificate of Quality Download