cartridge filters, filters, CPHX, CPH3, CPH5
- High heat Stability
- Non-toxic material of construction
- Heat sealed, no glues or adhesives
- Each filter comes with an individual certificate of quality
Consistent and Reliable Quality: | AseptiSure® cartridge filters are produced with ISO 9001-2008 certified quality management systems. |
Regulatory Compliance:
| Meet all pharmacopeial and compendia requirements and are registered with USFDA DMF #015554
|
Low Protein Binding:
| Results in increased overall product yield and higher throughputs with biological streams
|
High Throughputs:
| Translates to lower filtration costs, less number of filter changes and overall economy of operations.
|
Total Traceability
| Unique identification number is laser etched on each other.
|
Sterile filtration of:
- Proteinaceous liquids where minimum protein loss is desired, such as sera, culture soups and recombinant proteins, antibodies etc
- Cell culture media
- Buffers
- Small volume parenterals
- Large volume parenterals
Construction |
Membrane |
Polyethersulfone |
Final Filter Pore Size |
|
Prefilter Pore Size |
0.8 µm, 0.65 µm, 0.45 µm |
0.65 µm, 0.8 µm |
|
Support Layers |
Polyester |
Body and Core |
Polypropylene |
Size |
Size |
|
Effective Filtration Area (Nominal) |
|
Integrity Testing / Retention |
Bubble Point |
> 50psi (3.51Kg/cm²) with Water |
> 30psi (2.11Kg/cm²) with Water |
|
Microbial Retention |
LRV>7 for B.diminuta(ATCC 19146) per cm² | LRV>7 for S.marcescens (ATCC 19146) per cm² |
|
Operational |
Max. Operating Temperature |
80 °C @ < 2 Kg/cm² (30 psi) |
Max. Differential Pressure |
3.5 Kg/cm² (50 psi) @ 25 °C |
Reverse Pressure |
< 0.7 Kg/cm² (10 psi) @ 25 °C |
Sterilization |
5 Autoclave/In-line steam sterilization cycles at 135°C for 30 min., ∆p=5 psi (0.3kg/cm² |
Assurance |
Toxicity |
Passes Bioreactivity test, In Vivo, as per USP <88> for Class VI plastics |
Cytotoxicity |
Passes Biological Reactivity Tests, In Vitro, USP <87> for cytotoxicity |
Bacterial Endotoxin |
Aqueous extracts exhibit < 0.25 EU/ml as established by Limulus Amebocyte Lysate (LAL) Test |
Bioburden |
Bioburden level is < 1000 cfu/filter device as per ISO 11737-1 : 2018 |
Non Fiber Releasing |
Passes test as per USP and comply with USFDA 21 CFR Part 210.3(b)(6) for fiber release |
Indirect Food Additive |
All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520 |
Extractables with WFI |
Passes test as per USP |
Good Manufacturing Practice |
These products are manufactured in a facility which adheres to Good Manufacturing Practices. |
Oxidizable Substances |
Within limits as specified in USP |
Particle Shedding |
Passes USP test for particulates in injectables. |
TOC/Conductivity at 25 °C |
Meets the WFI requirements of USP <643> for Total Organic Carbon and USP <645> for Water Conductivity after a specified volume of purified water flush |
Quality Management System |
ISO-9001 Certified |
USFDA |
DMF No. 015554 |
pH Compatibility |
Compatible with pH range of 1-10 |
Type | |
AseptiSure® HS Mini (with 0.45µm Upstream Layer) | CPHX | AseptiSure® HS Mini (with 0.65µm Upstream Layer) | CPH3 | AseptiSure® HS Mini (with 0.8µm Upstream Layer) | CPH5 | | | Pore Size | | Code | 0.2µm | 01 | 0.45µm* | 02 | | Adapter | | Code | 4463 | E0 | 4463B | H0 | 4440 | U0 | Seal-K
| G0** | Seal-O
| F0*** | Seal-M
| J0 | | Elastomer | | Code | Silicone | SS | Without 'O' ring | XX | | Sterility | | Code | Non Sterile | 1 | | Pack Size | Pack Size | Code | 1 | 01 | |
* 0.45µm cartridge filter are available with 0.65µm or 0.8µm upstream layer only
**Adapter code “G0” does not come with Elastomer
***Adapter code F0 is available only in 5” cartridge filters
Example :
Example for Non Sterile: CPH55001E0SS101