AseptiVac® : The Ultimate Vacuum Filter 1000ml < 30 sec
mdi AseptiVac® are gamma sterile, ready to use disposable vacuum filtration devices with a unique pleated cartridge filter built into a cap which fits into the neck of the receiver. This design reduces the height of the system making it more stable.
The large area filter device with high flow, low protein binding polyethersulfone membrane,allows high speed filtration and enhanced throughput with even difficult to filter solutions in biopharmaceuticals and life science research labs.The conical shaped filter cartridge allows air bubbles to move away from the membrane,avoiding problems of membrane blockage.The hydrophobic vent in the filter body facilitates restart of filtration without air lock.
Saves time with high speed filtration: 1000 ml in < 30 Sec
Unique built in pleated PES cartridge filter
- Buffers
- Culture Media
- Serum Solutions
- Pure Sera
| Materials of Construction | |||
| Filter Membrane | Polyethersulfone | ||
| Filter Housing | Polypropylene | ||
| Funnel | Polystyrene | ||
| Bottle | Polystyrene | ||
| Dimensions | |||
| Screw Cap Neck | 45mm | ||
| Technical Specifications | |||
| Pore Size | 0.1μm, 0.2μm and 0.45μm | ||
| Filtration Area | 170 cm² | ||
| Funnel Capacity | 450 ml | ||
| Hold up Volume | < 5 ml | ||
| Available Receiver Bottle Capacity | 500 ml, 1000 ml | ||
| Operating Conditions | |||
| Maximum Operating Temperature | 45°C | ||
| Sterility | |||
| Gamma Irradiation | 25 kGy | ||
| Assurance | |||
| 100% Integrity Tested | Each and every AseptiVac filter device is tested for integrity with a non destructive filter integrity test which is correlated with actual microbial retention | ||
| Bacterial Endotoxin | The test filter extract, tested for endotoxins by the Kinetic -Turbidimetric Method with a sensitivity of 0.01 EU/ml, showed endotoxin levels of <0.25EU/ml. | ||
| Microbial Retention | AseptiVac filters are validated to deliver sterile effluents against high microbial challenge as per ASTM F838-05
|
||
| Extractables | AseptiVac vacuum filters exhibit very low extractables | ||
| Traceability | Each lot is accompanied with a certificate of quality and the unique lot number ensures complete traceability. | ||
| Biosafety | All materials of construction of AseptiVac filters were tested for Biological Reactivity mdi Tests, In Vivo for Class VI Plastics as per USP <88> and whole devices were tested for Biological Reactivity Tests, In Vitro for Cytotoxicity as per USP <87>. | ||
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Example :
| AKX7 | 41 | 01 | F | 10 | T | 3 | 08 |
- AseptiVac® KL: Single layer vaccum filtration unit
- AseptiVac® KS: Double layered serial vaccum filtration unit