ClariPro® GK-γ 1", 2", 5", 8"
mdi ClariPro® GK- γ gamma sterilizable hydrophilic PES membrane capsule filters are ready to use, disposable filtration devices. These filters are specially designed filters incorporating a microglassfiber upstream layer and a downstream PES membrane layer and are used as pre-filters in biopharmaceuticals process development as well as manufacturing processes for difficult to filter solutions.
- High Flow Rates
- High Throughput
- Very High Retention
- Low Protein Binding
- Compact Design
- Precipitate removal post viral inactivation
- Pre-filtration of serum solutions
- Clarification of cell harvest supernatants
- Polishing of turbid solutions
Construction | |||||
Membrane | Hydrophilic PES | ||||
Pore size | 0.1µm, 0.2µm, 0.5µm | ||||
Prefilter Membrane | Microglassfiber | ||||
Support Layers | Polyester | ||||
Body and Core | Polypropylene | ||||
Size | |||||
Size |
|
||||
Effective Filtration Area (Nominal) |
|
||||
Dimensions (End to End) - 1½" Sanitary Flange I/O |
|
||||
Dimension (End to End) - 1½" Sanitary Flange Inlet ½" Single Step Hose Barb Outlet |
|
||||
Dimensions (End to End) - ¾" Sanitary Flange I/O |
|
||||
Dimension (End to End) - ⅛" Hose Barb I/O |
|
||||
Dimension (End to End) - ½" Single Step Hose Barb I/O |
|
||||
Operational Radius (with Vent/ Drain) |
|
||||
Vent and Drain | ¼" Hose Barb with Silicone "O" ring for 2", 5" and 8" capsule filters | ||||
Operational | |||||
Max. Operating Temperature | 80 °C @ < 30 psi (2 Kg/cm²) | ||||
Max. Differential Pressure | < 60 psi (4 Kg/cm²) @ 30° C | ||||
Sterilization By Irradiation | Gamma Irradiatiable up to 50 kGy. These filters should not be autoclaved or in-line steam sterilized. | ||||
Shelf Life | 2 years after gamma sterilization | ||||
Assurance | |||||
Toxicity | Passes Bioreactivity test, In Vivo, as per USP for Class VI plastics | ||||
Bacterial Endotoxin | Aqueous extracts exhibit < 0.25 EU/ml as established by Limulus Amebocyte Lysate (LAL) Test | ||||
Bioburden | Bioburden level is < 1000 cfu/filter device as per ISO 11737-1 : 2018 | ||||
Non Fiber Releasing | Passes test as per USP and comply with USFDA 21 CFR Part 210.3 (b)(6) for fiber release | ||||
Particle Release | The filtrate complies with USP <788> test for particulate matter in injections | ||||
Indirect Food Additive | All Polypropylene components meet the FDA Indirect Food Additive requirements cited in 21 CFR 177.1520 | ||||
Extractables with WFI | Passes test as per USP | ||||
Good Manufacturing Practice | These products are manufactured in a facility which adheres to Good Manufacturing Practices. | ||||
Oxidizable Substances | Within limits as specified in USP | ||||
Quality Management System | ISO-9001 Certified | ||||
USFDA | DMF No. 015554 |
|
|
|
|
|
|
|
|
*1” Capsule Filters are not available with ½” Single step Hose Barb, ½” MNPT and 3/8" Hose Barb
**Male luer slip is available only in 1” capsule filter as outlet
***3/16" Hose Barb end connection is available in:
- 1" and 2" capsule filters as inlet and outlet
- 5" capsule filters as outlet only
**** Gamma sterilized filters cannot be gamma irradiated again
Example :
DGKX | 57 | 04 | DD | R | X | 1 | 01 |